aws.networkmanager.getCoreNetworkPolicyDocument

func GetCoreNetworkPolicyDocument(ctx *Context, args *GetCoreNetworkPolicyDocumentArgs, opts ...InvokeOption) (*GetCoreNetworkPolicyDocumentResult, error)
func GetCoreNetworkPolicyDocumentOutput(ctx *Context, args *GetCoreNetworkPolicyDocumentOutputArgs, opts ...InvokeOption) GetCoreNetworkPolicyDocumentResultOutput

> Note: This function is named GetCoreNetworkPolicyDocument in the Go SDK.

CoreNetworkConfigurations List<GetCoreNetworkPolicyDocumentCoreNetworkConfiguration>

The core network configuration section defines the Regions where a core network should operate. For AWS Regions that are defined in the policy, the core network creates a Core Network Edge where you can connect attachments. After it's created, each Core Network Edge is peered with every other defined Region and is configured with consistent segment and routing across all Regions. Regions cannot be removed until the associated attachments are deleted. Detailed below.

Segments List<GetCoreNetworkPolicyDocumentSegment>

Block argument that defines the different segments in the network. Here you can provide descriptions, change defaults, and provide explicit Regional operational and route filters. The names defined for each segment are used in the segment_actions and attachment_policies section. Each segment is created, and operates, as a completely separated routing domain. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

AttachmentPolicies List<GetCoreNetworkPolicyDocumentAttachmentPolicy>

In a core network, all attachments use the block argument attachment_policies section to map an attachment to a segment. Instead of manually associating a segment to each attachment, attachments use tags, and then the tags are used to associate the attachment to the specified segment. Detailed below.

NetworkFunctionGroups List<GetCoreNetworkPolicyDocumentNetworkFunctionGroup>

Block argument that defines the service insertion actions you want to include. Detailed below.

SegmentActions List<GetCoreNetworkPolicyDocumentSegmentAction>

A block argument, segment_actions define how routing works between segments. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

Version string

CoreNetworkConfigurations []GetCoreNetworkPolicyDocumentCoreNetworkConfiguration

The core network configuration section defines the Regions where a core network should operate. For AWS Regions that are defined in the policy, the core network creates a Core Network Edge where you can connect attachments. After it's created, each Core Network Edge is peered with every other defined Region and is configured with consistent segment and routing across all Regions. Regions cannot be removed until the associated attachments are deleted. Detailed below.

Segments []GetCoreNetworkPolicyDocumentSegment

Block argument that defines the different segments in the network. Here you can provide descriptions, change defaults, and provide explicit Regional operational and route filters. The names defined for each segment are used in the segment_actions and attachment_policies section. Each segment is created, and operates, as a completely separated routing domain. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

AttachmentPolicies []GetCoreNetworkPolicyDocumentAttachmentPolicy

In a core network, all attachments use the block argument attachment_policies section to map an attachment to a segment. Instead of manually associating a segment to each attachment, attachments use tags, and then the tags are used to associate the attachment to the specified segment. Detailed below.

NetworkFunctionGroups []GetCoreNetworkPolicyDocumentNetworkFunctionGroup

Block argument that defines the service insertion actions you want to include. Detailed below.

SegmentActions []GetCoreNetworkPolicyDocumentSegmentAction

A block argument, segment_actions define how routing works between segments. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

Version string

coreNetworkConfigurations List<GetCoreNetworkPolicyDocumentCoreNetworkConfiguration>

The core network configuration section defines the Regions where a core network should operate. For AWS Regions that are defined in the policy, the core network creates a Core Network Edge where you can connect attachments. After it's created, each Core Network Edge is peered with every other defined Region and is configured with consistent segment and routing across all Regions. Regions cannot be removed until the associated attachments are deleted. Detailed below.

segments List<GetCoreNetworkPolicyDocumentSegment>

Block argument that defines the different segments in the network. Here you can provide descriptions, change defaults, and provide explicit Regional operational and route filters. The names defined for each segment are used in the segment_actions and attachment_policies section. Each segment is created, and operates, as a completely separated routing domain. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

attachmentPolicies List<GetCoreNetworkPolicyDocumentAttachmentPolicy>

In a core network, all attachments use the block argument attachment_policies section to map an attachment to a segment. Instead of manually associating a segment to each attachment, attachments use tags, and then the tags are used to associate the attachment to the specified segment. Detailed below.

networkFunctionGroups List<GetCoreNetworkPolicyDocumentNetworkFunctionGroup>

Block argument that defines the service insertion actions you want to include. Detailed below.

segmentActions List<GetCoreNetworkPolicyDocumentSegmentAction>

A block argument, segment_actions define how routing works between segments. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

version String

coreNetworkConfigurations GetCoreNetworkPolicyDocumentCoreNetworkConfiguration[]

The core network configuration section defines the Regions where a core network should operate. For AWS Regions that are defined in the policy, the core network creates a Core Network Edge where you can connect attachments. After it's created, each Core Network Edge is peered with every other defined Region and is configured with consistent segment and routing across all Regions. Regions cannot be removed until the associated attachments are deleted. Detailed below.

segments GetCoreNetworkPolicyDocumentSegment[]

Block argument that defines the different segments in the network. Here you can provide descriptions, change defaults, and provide explicit Regional operational and route filters. The names defined for each segment are used in the segment_actions and attachment_policies section. Each segment is created, and operates, as a completely separated routing domain. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

attachmentPolicies GetCoreNetworkPolicyDocumentAttachmentPolicy[]

In a core network, all attachments use the block argument attachment_policies section to map an attachment to a segment. Instead of manually associating a segment to each attachment, attachments use tags, and then the tags are used to associate the attachment to the specified segment. Detailed below.

networkFunctionGroups GetCoreNetworkPolicyDocumentNetworkFunctionGroup[]

Block argument that defines the service insertion actions you want to include. Detailed below.

segmentActions GetCoreNetworkPolicyDocumentSegmentAction[]

A block argument, segment_actions define how routing works between segments. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

version string

core_network_configurations Sequence[GetCoreNetworkPolicyDocumentCoreNetworkConfiguration]

The core network configuration section defines the Regions where a core network should operate. For AWS Regions that are defined in the policy, the core network creates a Core Network Edge where you can connect attachments. After it's created, each Core Network Edge is peered with every other defined Region and is configured with consistent segment and routing across all Regions. Regions cannot be removed until the associated attachments are deleted. Detailed below.

segments Sequence[GetCoreNetworkPolicyDocumentSegment]

Block argument that defines the different segments in the network. Here you can provide descriptions, change defaults, and provide explicit Regional operational and route filters. The names defined for each segment are used in the segment_actions and attachment_policies section. Each segment is created, and operates, as a completely separated routing domain. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

attachment_policies Sequence[GetCoreNetworkPolicyDocumentAttachmentPolicy]

In a core network, all attachments use the block argument attachment_policies section to map an attachment to a segment. Instead of manually associating a segment to each attachment, attachments use tags, and then the tags are used to associate the attachment to the specified segment. Detailed below.

network_function_groups Sequence[GetCoreNetworkPolicyDocumentNetworkFunctionGroup]

Block argument that defines the service insertion actions you want to include. Detailed below.

segment_actions Sequence[GetCoreNetworkPolicyDocumentSegmentAction]

A block argument, segment_actions define how routing works between segments. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

version str

coreNetworkConfigurations List<Property Map>

The core network configuration section defines the Regions where a core network should operate. For AWS Regions that are defined in the policy, the core network creates a Core Network Edge where you can connect attachments. After it's created, each Core Network Edge is peered with every other defined Region and is configured with consistent segment and routing across all Regions. Regions cannot be removed until the associated attachments are deleted. Detailed below.

segments List<Property Map>

Block argument that defines the different segments in the network. Here you can provide descriptions, change defaults, and provide explicit Regional operational and route filters. The names defined for each segment are used in the segment_actions and attachment_policies section. Each segment is created, and operates, as a completely separated routing domain. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

attachmentPolicies List<Property Map>

In a core network, all attachments use the block argument attachment_policies section to map an attachment to a segment. Instead of manually associating a segment to each attachment, attachments use tags, and then the tags are used to associate the attachment to the specified segment. Detailed below.

networkFunctionGroups List<Property Map>

Block argument that defines the service insertion actions you want to include. Detailed below.

segmentActions List<Property Map>

A block argument, segment_actions define how routing works between segments. By default, attachments can only communicate with other attachments in the same segment. Detailed below.

version String

CoreNetworkConfigurations List<GetCoreNetworkPolicyDocumentCoreNetworkConfiguration>

Id string

The provider-assigned unique ID for this managed resource.

Json string

Standard JSON policy document rendered based on the arguments above.

Segments List<GetCoreNetworkPolicyDocumentSegment>

AttachmentPolicies List<GetCoreNetworkPolicyDocumentAttachmentPolicy>

NetworkFunctionGroups List<GetCoreNetworkPolicyDocumentNetworkFunctionGroup>

SegmentActions List<GetCoreNetworkPolicyDocumentSegmentAction>

Version string

CoreNetworkConfigurations []GetCoreNetworkPolicyDocumentCoreNetworkConfiguration

Id string

The provider-assigned unique ID for this managed resource.

Json string

Standard JSON policy document rendered based on the arguments above.

Segments []GetCoreNetworkPolicyDocumentSegment

AttachmentPolicies []GetCoreNetworkPolicyDocumentAttachmentPolicy

NetworkFunctionGroups []GetCoreNetworkPolicyDocumentNetworkFunctionGroup

SegmentActions []GetCoreNetworkPolicyDocumentSegmentAction

Version string

coreNetworkConfigurations List<GetCoreNetworkPolicyDocumentCoreNetworkConfiguration>

id String

The provider-assigned unique ID for this managed resource.

json String

Standard JSON policy document rendered based on the arguments above.

segments List<GetCoreNetworkPolicyDocumentSegment>

attachmentPolicies List<GetCoreNetworkPolicyDocumentAttachmentPolicy>

networkFunctionGroups List<GetCoreNetworkPolicyDocumentNetworkFunctionGroup>

segmentActions List<GetCoreNetworkPolicyDocumentSegmentAction>

version String

coreNetworkConfigurations GetCoreNetworkPolicyDocumentCoreNetworkConfiguration[]

id string

The provider-assigned unique ID for this managed resource.

json string

Standard JSON policy document rendered based on the arguments above.

segments GetCoreNetworkPolicyDocumentSegment[]

attachmentPolicies GetCoreNetworkPolicyDocumentAttachmentPolicy[]

networkFunctionGroups GetCoreNetworkPolicyDocumentNetworkFunctionGroup[]

segmentActions GetCoreNetworkPolicyDocumentSegmentAction[]

version string

core_network_configurations Sequence[GetCoreNetworkPolicyDocumentCoreNetworkConfiguration]

id str

The provider-assigned unique ID for this managed resource.

json str

Standard JSON policy document rendered based on the arguments above.

segments Sequence[GetCoreNetworkPolicyDocumentSegment]

attachment_policies Sequence[GetCoreNetworkPolicyDocumentAttachmentPolicy]

network_function_groups Sequence[GetCoreNetworkPolicyDocumentNetworkFunctionGroup]

segment_actions Sequence[GetCoreNetworkPolicyDocumentSegmentAction]

version str

coreNetworkConfigurations List<Property Map>

id String

The provider-assigned unique ID for this managed resource.

json String

Standard JSON policy document rendered based on the arguments above.

segments List<Property Map>

attachmentPolicies List<Property Map>

networkFunctionGroups List<Property Map>

segmentActions List<Property Map>

version String

Action GetCoreNetworkPolicyDocumentAttachmentPolicyAction

Action to take when a condition is true. Detailed Below.

Conditions List<GetCoreNetworkPolicyDocumentAttachmentPolicyCondition>

A block argument. Detailed Below.

RuleNumber int

An integer from 1 to 65535 indicating the rule's order number. Rules are processed in order from the lowest numbered rule to the highest. Rules stop processing when a rule is matched. It's important to make sure that you number your rules in the exact order that you want them processed.

ConditionLogic string

Valid values include and or or. This is a mandatory parameter only if you have more than one condition. The condition_logic apply to all of the conditions for a rule, which also means nested conditions of and or or are not supported. Use or if you want to associate the attachment with the segment by either the segment name or attachment tag value, or by the chosen conditions. Use and if you want to associate the attachment with the segment by either the segment name or attachment tag value and by the chosen conditions. Detailed Below.

Description string

A user-defined description that further helps identify the rule.

Action GetCoreNetworkPolicyDocumentAttachmentPolicyAction

Action to take when a condition is true. Detailed Below.

Conditions []GetCoreNetworkPolicyDocumentAttachmentPolicyCondition

A block argument. Detailed Below.

RuleNumber int

An integer from 1 to 65535 indicating the rule's order number. Rules are processed in order from the lowest numbered rule to the highest. Rules stop processing when a rule is matched. It's important to make sure that you number your rules in the exact order that you want them processed.

ConditionLogic string

Valid values include and or or. This is a mandatory parameter only if you have more than one condition. The condition_logic apply to all of the conditions for a rule, which also means nested conditions of and or or are not supported. Use or if you want to associate the attachment with the segment by either the segment name or attachment tag value, or by the chosen conditions. Use and if you want to associate the attachment with the segment by either the segment name or attachment tag value and by the chosen conditions. Detailed Below.

Description string

A user-defined description that further helps identify the rule.

action GetCoreNetworkPolicyDocumentAttachmentPolicyAction

Action to take when a condition is true. Detailed Below.

conditions List<GetCoreNetworkPolicyDocumentAttachmentPolicyCondition>

A block argument. Detailed Below.

ruleNumber Integer

An integer from 1 to 65535 indicating the rule's order number. Rules are processed in order from the lowest numbered rule to the highest. Rules stop processing when a rule is matched. It's important to make sure that you number your rules in the exact order that you want them processed.

conditionLogic String

Valid values include and or or. This is a mandatory parameter only if you have more than one condition. The condition_logic apply to all of the conditions for a rule, which also means nested conditions of and or or are not supported. Use or if you want to associate the attachment with the segment by either the segment name or attachment tag value, or by the chosen conditions. Use and if you want to associate the attachment with the segment by either the segment name or attachment tag value and by the chosen conditions. Detailed Below.

description String

A user-defined description that further helps identify the rule.

action GetCoreNetworkPolicyDocumentAttachmentPolicyAction

Action to take when a condition is true. Detailed Below.

conditions GetCoreNetworkPolicyDocumentAttachmentPolicyCondition[]

A block argument. Detailed Below.

ruleNumber number

An integer from 1 to 65535 indicating the rule's order number. Rules are processed in order from the lowest numbered rule to the highest. Rules stop processing when a rule is matched. It's important to make sure that you number your rules in the exact order that you want them processed.

conditionLogic string

Valid values include and or or. This is a mandatory parameter only if you have more than one condition. The condition_logic apply to all of the conditions for a rule, which also means nested conditions of and or or are not supported. Use or if you want to associate the attachment with the segment by either the segment name or attachment tag value, or by the chosen conditions. Use and if you want to associate the attachment with the segment by either the segment name or attachment tag value and by the chosen conditions. Detailed Below.

description string

A user-defined description that further helps identify the rule.

action GetCoreNetworkPolicyDocumentAttachmentPolicyAction

Action to take when a condition is true. Detailed Below.

conditions Sequence[GetCoreNetworkPolicyDocumentAttachmentPolicyCondition]

A block argument. Detailed Below.

rule_number int

An integer from 1 to 65535 indicating the rule's order number. Rules are processed in order from the lowest numbered rule to the highest. Rules stop processing when a rule is matched. It's important to make sure that you number your rules in the exact order that you want them processed.

condition_logic str

Valid values include and or or. This is a mandatory parameter only if you have more than one condition. The condition_logic apply to all of the conditions for a rule, which also means nested conditions of and or or are not supported. Use or if you want to associate the attachment with the segment by either the segment name or attachment tag value, or by the chosen conditions. Use and if you want to associate the attachment with the segment by either the segment name or attachment tag value and by the chosen conditions. Detailed Below.

description str

A user-defined description that further helps identify the rule.

action Property Map

Action to take when a condition is true. Detailed Below.

conditions List<Property Map>

A block argument. Detailed Below.

ruleNumber Number

An integer from 1 to 65535 indicating the rule's order number. Rules are processed in order from the lowest numbered rule to the highest. Rules stop processing when a rule is matched. It's important to make sure that you number your rules in the exact order that you want them processed.

conditionLogic String

Valid values include and or or. This is a mandatory parameter only if you have more than one condition. The condition_logic apply to all of the conditions for a rule, which also means nested conditions of and or or are not supported. Use or if you want to associate the attachment with the segment by either the segment name or attachment tag value, or by the chosen conditions. Use and if you want to associate the attachment with the segment by either the segment name or attachment tag value and by the chosen conditions. Detailed Below.

description String

A user-defined description that further helps identify the rule.

AddToNetworkFunctionGroup string

The name of the network function group to attach to the attachment policy.

AssociationMethod string

Defines how a segment is mapped. Values can be constant or tag. constant statically defines the segment to associate the attachment to. tag uses the value of a tag to dynamically try to map to a segment.reference_policies_elements_condition_operators.html) to evaluate.

RequireAcceptance bool

Determines if this mapping should override the segment value for require_attachment_acceptance. You can only set this to true, indicating that this setting applies only to segments that have require_attachment_acceptance set to false. If the segment already has the default require_attachment_acceptance, you can set this to inherit segment’s acceptance value.

Segment string

Name of the segment to share as defined in the segments section. This is used only when the association_method is constant.

TagValueOfKey string

Maps the attachment to the value of a known key. This is used with the association_method is tag. For example a tag of stage = “test”, will map to a segment named test. The value must exactly match the name of a segment. This allows you to have many segments, but use only a single rule without having to define multiple nearly identical conditions. This prevents creating many similar conditions that all use the same keys to map to segments.

AddToNetworkFunctionGroup string

The name of the network function group to attach to the attachment policy.

AssociationMethod string

Defines how a segment is mapped. Values can be constant or tag. constant statically defines the segment to associate the attachment to. tag uses the value of a tag to dynamically try to map to a segment.reference_policies_elements_condition_operators.html) to evaluate.

RequireAcceptance bool

Determines if this mapping should override the segment value for require_attachment_acceptance. You can only set this to true, indicating that this setting applies only to segments that have require_attachment_acceptance set to false. If the segment already has the default require_attachment_acceptance, you can set this to inherit segment’s acceptance value.

Segment string

Name of the segment to share as defined in the segments section. This is used only when the association_method is constant.

TagValueOfKey string

Maps the attachment to the value of a known key. This is used with the association_method is tag. For example a tag of stage = “test”, will map to a segment named test. The value must exactly match the name of a segment. This allows you to have many segments, but use only a single rule without having to define multiple nearly identical conditions. This prevents creating many similar conditions that all use the same keys to map to segments.

addToNetworkFunctionGroup String

The name of the network function group to attach to the attachment policy.

associationMethod String

Defines how a segment is mapped. Values can be constant or tag. constant statically defines the segment to associate the attachment to. tag uses the value of a tag to dynamically try to map to a segment.reference_policies_elements_condition_operators.html) to evaluate.

requireAcceptance Boolean

Determines if this mapping should override the segment value for require_attachment_acceptance. You can only set this to true, indicating that this setting applies only to segments that have require_attachment_acceptance set to false. If the segment already has the default require_attachment_acceptance, you can set this to inherit segment’s acceptance value.

segment String

Name of the segment to share as defined in the segments section. This is used only when the association_method is constant.

tagValueOfKey String

Maps the attachment to the value of a known key. This is used with the association_method is tag. For example a tag of stage = “test”, will map to a segment named test. The value must exactly match the name of a segment. This allows you to have many segments, but use only a single rule without having to define multiple nearly identical conditions. This prevents creating many similar conditions that all use the same keys to map to segments.

addToNetworkFunctionGroup string

The name of the network function group to attach to the attachment policy.

associationMethod string

Defines how a segment is mapped. Values can be constant or tag. constant statically defines the segment to associate the attachment to. tag uses the value of a tag to dynamically try to map to a segment.reference_policies_elements_condition_operators.html) to evaluate.

requireAcceptance boolean

Determines if this mapping should override the segment value for require_attachment_acceptance. You can only set this to true, indicating that this setting applies only to segments that have require_attachment_acceptance set to false. If the segment already has the default require_attachment_acceptance, you can set this to inherit segment’s acceptance value.

segment string

Name of the segment to share as defined in the segments section. This is used only when the association_method is constant.

tagValueOfKey string

Maps the attachment to the value of a known key. This is used with the association_method is tag. For example a tag of stage = “test”, will map to a segment named test. The value must exactly match the name of a segment. This allows you to have many segments, but use only a single rule without having to define multiple nearly identical conditions. This prevents creating many similar conditions that all use the same keys to map to segments.

add_to_network_function_group str

The name of the network function group to attach to the attachment policy.

association_method str

Defines how a segment is mapped. Values can be constant or tag. constant statically defines the segment to associate the attachment to. tag uses the value of a tag to dynamically try to map to a segment.reference_policies_elements_condition_operators.html) to evaluate.

require_acceptance bool

Determines if this mapping should override the segment value for require_attachment_acceptance. You can only set this to true, indicating that this setting applies only to segments that have require_attachment_acceptance set to false. If the segment already has the default require_attachment_acceptance, you can set this to inherit segment’s acceptance value.

segment str

Name of the segment to share as defined in the segments section. This is used only when the association_method is constant.

tag_value_of_key str

Maps the attachment to the value of a known key. This is used with the association_method is tag. For example a tag of stage = “test”, will map to a segment named test. The value must exactly match the name of a segment. This allows you to have many segments, but use only a single rule without having to define multiple nearly identical conditions. This prevents creating many similar conditions that all use the same keys to map to segments.

addToNetworkFunctionGroup String

The name of the network function group to attach to the attachment policy.

associationMethod String

Defines how a segment is mapped. Values can be constant or tag. constant statically defines the segment to associate the attachment to. tag uses the value of a tag to dynamically try to map to a segment.reference_policies_elements_condition_operators.html) to evaluate.

requireAcceptance Boolean

Determines if this mapping should override the segment value for require_attachment_acceptance. You can only set this to true, indicating that this setting applies only to segments that have require_attachment_acceptance set to false. If the segment already has the default require_attachment_acceptance, you can set this to inherit segment’s acceptance value.

segment String

Name of the segment to share as defined in the segments section. This is used only when the association_method is constant.

tagValueOfKey String

Maps the attachment to the value of a known key. This is used with the association_method is tag. For example a tag of stage = “test”, will map to a segment named test. The value must exactly match the name of a segment. This allows you to have many segments, but use only a single rule without having to define multiple nearly identical conditions. This prevents creating many similar conditions that all use the same keys to map to segments.

Type string

Valid values include: account-id, any, tag-value, tag-exists, resource-id, region, attachment-type.

Key string

string value

Operator string

Valid values include: equals, not-equals, contains, begins-with.

Value string

string value

Type string

Valid values include: account-id, any, tag-value, tag-exists, resource-id, region, attachment-type.

Key string

string value

Operator string

Valid values include: equals, not-equals, contains, begins-with.

Value string

string value

type String

Valid values include: account-id, any, tag-value, tag-exists, resource-id, region, attachment-type.

key String

string value

operator String

Valid values include: equals, not-equals, contains, begins-with.

value String

string value

type string

Valid values include: account-id, any, tag-value, tag-exists, resource-id, region, attachment-type.

key string

string value

operator string

Valid values include: equals, not-equals, contains, begins-with.

value string

string value

type str

Valid values include: account-id, any, tag-value, tag-exists, resource-id, region, attachment-type.

key str

string value

operator str

Valid values include: equals, not-equals, contains, begins-with.

value str

string value

type String

Valid values include: account-id, any, tag-value, tag-exists, resource-id, region, attachment-type.

key String

string value

operator String

Valid values include: equals, not-equals, contains, begins-with.

value String

string value

AsnRanges List<string>

List of strings containing Autonomous System Numbers (ASNs) to assign to Core Network Edges. By default, the core network automatically assigns an ASN for each Core Network Edge but you can optionally define the ASN in the edge-locations for each Region. The ASN uses an array of integer ranges only from 64512 to 65534 and 4200000000 to 4294967294 expressed as a string like "64512-65534". No other ASN ranges can be used.

EdgeLocations List<GetCoreNetworkPolicyDocumentCoreNetworkConfigurationEdgeLocation>

A block value of AWS Region locations where you're creating Core Network Edges. Detailed below.

InsideCidrBlocks List<string>

The Classless Inter-Domain Routing (CIDR) block range used to create tunnels for AWS Transit Gateway Connect. The format is standard AWS CIDR range (for example, 10.0.1.0/24). You can optionally define the inside CIDR in the Core Network Edges section per Region. The minimum is a /24 for IPv4 or /64 for IPv6. You can provide multiple /24 subnets or a larger CIDR range. If you define a larger CIDR range, new Core Network Edges will be automatically assigned /24 and /64 subnets from the larger CIDR. an Inside CIDR block is required for attaching Connect attachments to a Core Network Edge.

VpnEcmpSupport bool

Indicates whether the core network forwards traffic over multiple equal-cost routes using VPN. The value can be either true or false. The default is true.

AsnRanges []string

List of strings containing Autonomous System Numbers (ASNs) to assign to Core Network Edges. By default, the core network automatically assigns an ASN for each Core Network Edge but you can optionally define the ASN in the edge-locations for each Region. The ASN uses an array of integer ranges only from 64512 to 65534 and 4200000000 to 4294967294 expressed as a string like "64512-65534". No other ASN ranges can be used.

EdgeLocations []GetCoreNetworkPolicyDocumentCoreNetworkConfigurationEdgeLocation

A block value of AWS Region locations where you're creating Core Network Edges. Detailed below.

InsideCidrBlocks []string

The Classless Inter-Domain Routing (CIDR) block range used to create tunnels for AWS Transit Gateway Connect. The format is standard AWS CIDR range (for example, 10.0.1.0/24). You can optionally define the inside CIDR in the Core Network Edges section per Region. The minimum is a /24 for IPv4 or /64 for IPv6. You can provide multiple /24 subnets or a larger CIDR range. If you define a larger CIDR range, new Core Network Edges will be automatically assigned /24 and /64 subnets from the larger CIDR. an Inside CIDR block is required for attaching Connect attachments to a Core Network Edge.

VpnEcmpSupport bool

Indicates whether the core network forwards traffic over multiple equal-cost routes using VPN. The value can be either true or false. The default is true.

asnRanges List<String>

List of strings containing Autonomous System Numbers (ASNs) to assign to Core Network Edges. By default, the core network automatically assigns an ASN for each Core Network Edge but you can optionally define the ASN in the edge-locations for each Region. The ASN uses an array of integer ranges only from 64512 to 65534 and 4200000000 to 4294967294 expressed as a string like "64512-65534". No other ASN ranges can be used.

edgeLocations List<GetCoreNetworkPolicyDocumentCoreNetworkConfigurationEdgeLocation>

A block value of AWS Region locations where you're creating Core Network Edges. Detailed below.

insideCidrBlocks List<String>

The Classless Inter-Domain Routing (CIDR) block range used to create tunnels for AWS Transit Gateway Connect. The format is standard AWS CIDR range (for example, 10.0.1.0/24). You can optionally define the inside CIDR in the Core Network Edges section per Region. The minimum is a /24 for IPv4 or /64 for IPv6. You can provide multiple /24 subnets or a larger CIDR range. If you define a larger CIDR range, new Core Network Edges will be automatically assigned /24 and /64 subnets from the larger CIDR. an Inside CIDR block is required for attaching Connect attachments to a Core Network Edge.

vpnEcmpSupport Boolean

Indicates whether the core network forwards traffic over multiple equal-cost routes using VPN. The value can be either true or false. The default is true.

asnRanges string[]

List of strings containing Autonomous System Numbers (ASNs) to assign to Core Network Edges. By default, the core network automatically assigns an ASN for each Core Network Edge but you can optionally define the ASN in the edge-locations for each Region. The ASN uses an array of integer ranges only from 64512 to 65534 and 4200000000 to 4294967294 expressed as a string like "64512-65534". No other ASN ranges can be used.

edgeLocations GetCoreNetworkPolicyDocumentCoreNetworkConfigurationEdgeLocation[]

A block value of AWS Region locations where you're creating Core Network Edges. Detailed below.

insideCidrBlocks string[]

The Classless Inter-Domain Routing (CIDR) block range used to create tunnels for AWS Transit Gateway Connect. The format is standard AWS CIDR range (for example, 10.0.1.0/24). You can optionally define the inside CIDR in the Core Network Edges section per Region. The minimum is a /24 for IPv4 or /64 for IPv6. You can provide multiple /24 subnets or a larger CIDR range. If you define a larger CIDR range, new Core Network Edges will be automatically assigned /24 and /64 subnets from the larger CIDR. an Inside CIDR block is required for attaching Connect attachments to a Core Network Edge.

vpnEcmpSupport boolean

Indicates whether the core network forwards traffic over multiple equal-cost routes using VPN. The value can be either true or false. The default is true.

asn_ranges Sequence[str]

List of strings containing Autonomous System Numbers (ASNs) to assign to Core Network Edges. By default, the core network automatically assigns an ASN for each Core Network Edge but you can optionally define the ASN in the edge-locations for each Region. The ASN uses an array of integer ranges only from 64512 to 65534 and 4200000000 to 4294967294 expressed as a string like "64512-65534". No other ASN ranges can be used.

edge_locations Sequence[GetCoreNetworkPolicyDocumentCoreNetworkConfigurationEdgeLocation]

A block value of AWS Region locations where you're creating Core Network Edges. Detailed below.

inside_cidr_blocks Sequence[str]

The Classless Inter-Domain Routing (CIDR) block range used to create tunnels for AWS Transit Gateway Connect. The format is standard AWS CIDR range (for example, 10.0.1.0/24). You can optionally define the inside CIDR in the Core Network Edges section per Region. The minimum is a /24 for IPv4 or /64 for IPv6. You can provide multiple /24 subnets or a larger CIDR range. If you define a larger CIDR range, new Core Network Edges will be automatically assigned /24 and /64 subnets from the larger CIDR. an Inside CIDR block is required for attaching Connect attachments to a Core Network Edge.

vpn_ecmp_support bool

Indicates whether the core network forwards traffic over multiple equal-cost routes using VPN. The value can be either true or false. The default is true.

asnRanges List<String>

List of strings containing Autonomous System Numbers (ASNs) to assign to Core Network Edges. By default, the core network automatically assigns an ASN for each Core Network Edge but you can optionally define the ASN in the edge-locations for each Region. The ASN uses an array of integer ranges only from 64512 to 65534 and 4200000000 to 4294967294 expressed as a string like "64512-65534". No other ASN ranges can be used.

edgeLocations List<Property Map>

A block value of AWS Region locations where you're creating Core Network Edges. Detailed below.

insideCidrBlocks List<String>

The Classless Inter-Domain Routing (CIDR) block range used to create tunnels for AWS Transit Gateway Connect. The format is standard AWS CIDR range (for example, 10.0.1.0/24). You can optionally define the inside CIDR in the Core Network Edges section per Region. The minimum is a /24 for IPv4 or /64 for IPv6. You can provide multiple /24 subnets or a larger CIDR range. If you define a larger CIDR range, new Core Network Edges will be automatically assigned /24 and /64 subnets from the larger CIDR. an Inside CIDR block is required for attaching Connect attachments to a Core Network Edge.

vpnEcmpSupport Boolean

Indicates whether the core network forwards traffic over multiple equal-cost routes using VPN. The value can be either true or false. The default is true.

Location string

Asn string

ASN of the Core Network Edge in an AWS Region. By default, the ASN will be a single integer automatically assigned from asn_ranges

InsideCidrBlocks List<string>

The local CIDR blocks for this Core Network Edge for AWS Transit Gateway Connect attachments. By default, this CIDR block will be one or more optional IPv4 and IPv6 CIDR prefixes auto-assigned from inside_cidr_blocks.

Location string

Asn string

ASN of the Core Network Edge in an AWS Region. By default, the ASN will be a single integer automatically assigned from asn_ranges

InsideCidrBlocks []string

The local CIDR blocks for this Core Network Edge for AWS Transit Gateway Connect attachments. By default, this CIDR block will be one or more optional IPv4 and IPv6 CIDR prefixes auto-assigned from inside_cidr_blocks.

location String

asn String

ASN of the Core Network Edge in an AWS Region. By default, the ASN will be a single integer automatically assigned from asn_ranges

insideCidrBlocks List<String>

The local CIDR blocks for this Core Network Edge for AWS Transit Gateway Connect attachments. By default, this CIDR block will be one or more optional IPv4 and IPv6 CIDR prefixes auto-assigned from inside_cidr_blocks.

location string

asn string

ASN of the Core Network Edge in an AWS Region. By default, the ASN will be a single integer automatically assigned from asn_ranges

insideCidrBlocks string[]

The local CIDR blocks for this Core Network Edge for AWS Transit Gateway Connect attachments. By default, this CIDR block will be one or more optional IPv4 and IPv6 CIDR prefixes auto-assigned from inside_cidr_blocks.

location str

asn str

ASN of the Core Network Edge in an AWS Region. By default, the ASN will be a single integer automatically assigned from asn_ranges

inside_cidr_blocks Sequence[str]

The local CIDR blocks for this Core Network Edge for AWS Transit Gateway Connect attachments. By default, this CIDR block will be one or more optional IPv4 and IPv6 CIDR prefixes auto-assigned from inside_cidr_blocks.

location String

asn String

ASN of the Core Network Edge in an AWS Region. By default, the ASN will be a single integer automatically assigned from asn_ranges

insideCidrBlocks List<String>

The local CIDR blocks for this Core Network Edge for AWS Transit Gateway Connect attachments. By default, this CIDR block will be one or more optional IPv4 and IPv6 CIDR prefixes auto-assigned from inside_cidr_blocks.

Name string

This identifies the network function group container.

RequireAttachmentAcceptance bool

This will be either true, that attachment acceptance is required, or false, that it is not required.

Description string

Optional description of the network function group.

Name string

This identifies the network function group container.

RequireAttachmentAcceptance bool

This will be either true, that attachment acceptance is required, or false, that it is not required.

Description string

Optional description of the network function group.

name String

This identifies the network function group container.

requireAttachmentAcceptance Boolean

This will be either true, that attachment acceptance is required, or false, that it is not required.

description String

Optional description of the network function group.

name string

This identifies the network function group container.

requireAttachmentAcceptance boolean

This will be either true, that attachment acceptance is required, or false, that it is not required.

description string

Optional description of the network function group.

name str

This identifies the network function group container.

require_attachment_acceptance bool

This will be either true, that attachment acceptance is required, or false, that it is not required.

description str

Optional description of the network function group.

name String

This identifies the network function group container.

requireAttachmentAcceptance Boolean

This will be either true, that attachment acceptance is required, or false, that it is not required.

description String

Optional description of the network function group.

Name string

Unique name for a segment. The name is a string used in other parts of the policy document, as well as in the console for metrics and other reference points. Valid characters are a–z, and 0–9.

AllowFilters List<string>

List of strings of segment names that explicitly allows only routes from the segments that are listed in the array. Use the allow_filter setting if a segment has a well-defined group of other segments that connectivity should be restricted to. It is applied after routes have been shared in segment_actions. If a segment is listed in allow_filter, attachments between the two segments will have routes if they are also shared in the segment-actions area. For example, you might have a segment named "video-producer" that should only ever share routes with a "video-distributor" segment, no matter how many other share statements are created.

DenyFilters List<string>

An array of segments that disallows routes from the segments listed in the array. It is applied only after routes have been shared in segment_actions. If a segment is listed in the deny_filter, attachments between the two segments will never have routes shared across them. For example, you might have a "financial" payment segment that should never share routes with a "development" segment, regardless of how many other share statements are created. Adding the payments segment to the deny-filter parameter prevents any shared routes from being created with other segments.

Description string

A user-defined string describing the segment.

EdgeLocations List<string>

A list of strings of AWS Region names. Allows you to define a more restrictive set of Regions for a segment. The edge location must be a subset of the locations that are defined for edge_locations in the core_network_configuration.

IsolateAttachments bool

This Boolean setting determines whether attachments on the same segment can communicate with each other. If set to true, the only routes available will be either shared routes through the share actions, which are attachments in other segments, or static routes. The default value is false. For example, you might have a segment dedicated to "development" that should never allow VPCs to talk to each other, even if they’re on the same segment. In this example, you would keep the default parameter of false.

RequireAttachmentAcceptance bool

This Boolean setting determines whether attachment requests are automatically approved or require acceptance. The default is true, indicating that attachment requests require acceptance. For example, you might use this setting to allow a "sandbox" segment to allow any attachment request so that a core network or attachment administrator does not need to review and approve attachment requests. In this example, require_attachment_acceptance is set to false.

Name string

Unique name for a segment. The name is a string used in other parts of the policy document, as well as in the console for metrics and other reference points. Valid characters are a–z, and 0–9.

AllowFilters []string

List of strings of segment names that explicitly allows only routes from the segments that are listed in the array. Use the allow_filter setting if a segment has a well-defined group of other segments that connectivity should be restricted to. It is applied after routes have been shared in segment_actions. If a segment is listed in allow_filter, attachments between the two segments will have routes if they are also shared in the segment-actions area. For example, you might have a segment named "video-producer" that should only ever share routes with a "video-distributor" segment, no matter how many other share statements are created.

DenyFilters []string

An array of segments that disallows routes from the segments listed in the array. It is applied only after routes have been shared in segment_actions. If a segment is listed in the deny_filter, attachments between the two segments will never have routes shared across them. For example, you might have a "financial" payment segment that should never share routes with a "development" segment, regardless of how many other share statements are created. Adding the payments segment to the deny-filter parameter prevents any shared routes from being created with other segments.

Description string

A user-defined string describing the segment.

EdgeLocations []string

A list of strings of AWS Region names. Allows you to define a more restrictive set of Regions for a segment. The edge location must be a subset of the locations that are defined for edge_locations in the core_network_configuration.

IsolateAttachments bool

This Boolean setting determines whether attachments on the same segment can communicate with each other. If set to true, the only routes available will be either shared routes through the share actions, which are attachments in other segments, or static routes. The default value is false. For example, you might have a segment dedicated to "development" that should never allow VPCs to talk to each other, even if they’re on the same segment. In this example, you would keep the default parameter of false.

RequireAttachmentAcceptance bool

This Boolean setting determines whether attachment requests are automatically approved or require acceptance. The default is true, indicating that attachment requests require acceptance. For example, you might use this setting to allow a "sandbox" segment to allow any attachment request so that a core network or attachment administrator does not need to review and approve attachment requests. In this example, require_attachment_acceptance is set to false.

name String

Unique name for a segment. The name is a string used in other parts of the policy document, as well as in the console for metrics and other reference points. Valid characters are a–z, and 0–9.

allowFilters List<String>

List of strings of segment names that explicitly allows only routes from the segments that are listed in the array. Use the allow_filter setting if a segment has a well-defined group of other segments that connectivity should be restricted to. It is applied after routes have been shared in segment_actions. If a segment is listed in allow_filter, attachments between the two segments will have routes if they are also shared in the segment-actions area. For example, you might have a segment named "video-producer" that should only ever share routes with a "video-distributor" segment, no matter how many other share statements are created.

denyFilters List<String>

An array of segments that disallows routes from the segments listed in the array. It is applied only after routes have been shared in segment_actions. If a segment is listed in the deny_filter, attachments between the two segments will never have routes shared across them. For example, you might have a "financial" payment segment that should never share routes with a "development" segment, regardless of how many other share statements are created. Adding the payments segment to the deny-filter parameter prevents any shared routes from being created with other segments.

description String

A user-defined string describing the segment.

edgeLocations List<String>

A list of strings of AWS Region names. Allows you to define a more restrictive set of Regions for a segment. The edge location must be a subset of the locations that are defined for edge_locations in the core_network_configuration.

isolateAttachments Boolean

This Boolean setting determines whether attachments on the same segment can communicate with each other. If set to true, the only routes available will be either shared routes through the share actions, which are attachments in other segments, or static routes. The default value is false. For example, you might have a segment dedicated to "development" that should never allow VPCs to talk to each other, even if they’re on the same segment. In this example, you would keep the default parameter of false.

requireAttachmentAcceptance Boolean

This Boolean setting determines whether attachment requests are automatically approved or require acceptance. The default is true, indicating that attachment requests require acceptance. For example, you might use this setting to allow a "sandbox" segment to allow any attachment request so that a core network or attachment administrator does not need to review and approve attachment requests. In this example, require_attachment_acceptance is set to false.

name string

Unique name for a segment. The name is a string used in other parts of the policy document, as well as in the console for metrics and other reference points. Valid characters are a–z, and 0–9.

allowFilters string[]

List of strings of segment names that explicitly allows only routes from the segments that are listed in the array. Use the allow_filter setting if a segment has a well-defined group of other segments that connectivity should be restricted to. It is applied after routes have been shared in segment_actions. If a segment is listed in allow_filter, attachments between the two segments will have routes if they are also shared in the segment-actions area. For example, you might have a segment named "video-producer" that should only ever share routes with a "video-distributor" segment, no matter how many other share statements are created.

denyFilters string[]

An array of segments that disallows routes from the segments listed in the array. It is applied only after routes have been shared in segment_actions. If a segment is listed in the deny_filter, attachments between the two segments will never have routes shared across them. For example, you might have a "financial" payment segment that should never share routes with a "development" segment, regardless of how many other share statements are created. Adding the payments segment to the deny-filter parameter prevents any shared routes from being created with other segments.

description string

A user-defined string describing the segment.

edgeLocations string[]

A list of strings of AWS Region names. Allows you to define a more restrictive set of Regions for a segment. The edge location must be a subset of the locations that are defined for edge_locations in the core_network_configuration.

isolateAttachments boolean

This Boolean setting determines whether attachments on the same segment can communicate with each other. If set to true, the only routes available will be either shared routes through the share actions, which are attachments in other segments, or static routes. The default value is false. For example, you might have a segment dedicated to "development" that should never allow VPCs to talk to each other, even if they’re on the same segment. In this example, you would keep the default parameter of false.

requireAttachmentAcceptance boolean

This Boolean setting determines whether attachment requests are automatically approved or require acceptance. The default is true, indicating that attachment requests require acceptance. For example, you might use this setting to allow a "sandbox" segment to allow any attachment request so that a core network or attachment administrator does not need to review and approve attachment requests. In this example, require_attachment_acceptance is set to false.

name str

Unique name for a segment. The name is a string used in other parts of the policy document, as well as in the console for metrics and other reference points. Valid characters are a–z, and 0–9.

allow_filters Sequence[str]

List of strings of segment names that explicitly allows only routes from the segments that are listed in the array. Use the allow_filter setting if a segment has a well-defined group of other segments that connectivity should be restricted to. It is applied after routes have been shared in segment_actions. If a segment is listed in allow_filter, attachments between the two segments will have routes if they are also shared in the segment-actions area. For example, you might have a segment named "video-producer" that should only ever share routes with a "video-distributor" segment, no matter how many other share statements are created.

deny_filters Sequence[str]

An array of segments that disallows routes from the segments listed in the array. It is applied only after routes have been shared in segment_actions. If a segment is listed in the deny_filter, attachments between the two segments will never have routes shared across them. For example, you might have a "financial" payment segment that should never share routes with a "development" segment, regardless of how many other share statements are created. Adding the payments segment to the deny-filter parameter prevents any shared routes from being created with other segments.

description str

A user-defined string describing the segment.

edge_locations Sequence[str]

A list of strings of AWS Region names. Allows you to define a more restrictive set of Regions for a segment. The edge location must be a subset of the locations that are defined for edge_locations in the core_network_configuration.

isolate_attachments bool

This Boolean setting determines whether attachments on the same segment can communicate with each other. If set to true, the only routes available will be either shared routes through the share actions, which are attachments in other segments, or static routes. The default value is false. For example, you might have a segment dedicated to "development" that should never allow VPCs to talk to each other, even if they’re on the same segment. In this example, you would keep the default parameter of false.

require_attachment_acceptance bool

This Boolean setting determines whether attachment requests are automatically approved or require acceptance. The default is true, indicating that attachment requests require acceptance. For example, you might use this setting to allow a "sandbox" segment to allow any attachment request so that a core network or attachment administrator does not need to review and approve attachment requests. In this example, require_attachment_acceptance is set to false.

name String

Unique name for a segment. The name is a string used in other parts of the policy document, as well as in the console for metrics and other reference points. Valid characters are a–z, and 0–9.

allowFilters List<String>

List of strings of segment names that explicitly allows only routes from the segments that are listed in the array. Use the allow_filter setting if a segment has a well-defined group of other segments that connectivity should be restricted to. It is applied after routes have been shared in segment_actions. If a segment is listed in allow_filter, attachments between the two segments will have routes if they are also shared in the segment-actions area. For example, you might have a segment named "video-producer" that should only ever share routes with a "video-distributor" segment, no matter how many other share statements are created.

denyFilters List<String>

An array of segments that disallows routes from the segments listed in the array. It is applied only after routes have been shared in segment_actions. If a segment is listed in the deny_filter, attachments between the two segments will never have routes shared across them. For example, you might have a "financial" payment segment that should never share routes with a "development" segment, regardless of how many other share statements are created. Adding the payments segment to the deny-filter parameter prevents any shared routes from being created with other segments.

description String

A user-defined string describing the segment.

edgeLocations List<String>

A list of strings of AWS Region names. Allows you to define a more restrictive set of Regions for a segment. The edge location must be a subset of the locations that are defined for edge_locations in the core_network_configuration.

isolateAttachments Boolean

This Boolean setting determines whether attachments on the same segment can communicate with each other. If set to true, the only routes available will be either shared routes through the share actions, which are attachments in other segments, or static routes. The default value is false. For example, you might have a segment dedicated to "development" that should never allow VPCs to talk to each other, even if they’re on the same segment. In this example, you would keep the default parameter of false.

requireAttachmentAcceptance Boolean

This Boolean setting determines whether attachment requests are automatically approved or require acceptance. The default is true, indicating that attachment requests require acceptance. For example, you might use this setting to allow a "sandbox" segment to allow any attachment request so that a core network or attachment administrator does not need to review and approve attachment requests. In this example, require_attachment_acceptance is set to false.

Action string

Action to take for the chosen segment. Valid values: create-route, share, send-via and send-to.

Segment string

Name of the segment.

Description string

A user-defined string describing the segment action.

DestinationCidrBlocks List<string>

List of strings containing CIDRs. You can define the IPv4 and IPv6 CIDR notation for each AWS Region. For example, 10.1.0.0/16 or 2001:db8::/56. This is an array of CIDR notation strings.

Destinations List<string>

A list of strings. Valid values include ["blackhole"] or a list of attachment ids.

Mode string

String. When action is share, a mode value of attachment-route places the attachment and return routes in each of the share_with segments. When action is send-via, indicates the mode used for packets. Valid values: attachment-route, single-hop, dual-hop.

ShareWithExcepts List<string>

A set subtraction of segments to not share with.

ShareWiths List<string>

A list of strings to share with. Must be a substring is all segments. Valid values include: ["*"] or ["<segment-names>"].

Via GetCoreNetworkPolicyDocumentSegmentActionVia

The network function groups and any edge overrides associated with the action.

WhenSentTo GetCoreNetworkPolicyDocumentSegmentActionWhenSentTo

The destination segments for the send-via or send-to action.

Action string

Action to take for the chosen segment. Valid values: create-route, share, send-via and send-to.

Segment string

Name of the segment.

Description string

A user-defined string describing the segment action.

DestinationCidrBlocks []string

List of strings containing CIDRs. You can define the IPv4 and IPv6 CIDR notation for each AWS Region. For example, 10.1.0.0/16 or 2001:db8::/56. This is an array of CIDR notation strings.

Destinations []string

A list of strings. Valid values include ["blackhole"] or a list of attachment ids.

Mode string

String. When action is share, a mode value of attachment-route places the attachment and return routes in each of the share_with segments. When action is send-via, indicates the mode used for packets. Valid values: attachment-route, single-hop, dual-hop.

ShareWithExcepts []string

A set subtraction of segments to not share with.

ShareWiths []string

A list of strings to share with. Must be a substring is all segments. Valid values include: ["*"] or ["<segment-names>"].

Via GetCoreNetworkPolicyDocumentSegmentActionVia

The network function groups and any edge overrides associated with the action.

WhenSentTo GetCoreNetworkPolicyDocumentSegmentActionWhenSentTo

The destination segments for the send-via or send-to action.

action String

Action to take for the chosen segment. Valid values: create-route, share, send-via and send-to.

segment String

Name of the segment.

description String

A user-defined string describing the segment action.

destinationCidrBlocks List<String>

List of strings containing CIDRs. You can define the IPv4 and IPv6 CIDR notation for each AWS Region. For example, 10.1.0.0/16 or 2001:db8::/56. This is an array of CIDR notation strings.

destinations List<String>

A list of strings. Valid values include ["blackhole"] or a list of attachment ids.

mode String

String. When action is share, a mode value of attachment-route places the attachment and return routes in each of the share_with segments. When action is send-via, indicates the mode used for packets. Valid values: attachment-route, single-hop, dual-hop.

shareWithExcepts List<String>

A set subtraction of segments to not share with.

shareWiths List<String>

A list of strings to share with. Must be a substring is all segments. Valid values include: ["*"] or ["<segment-names>"].

via GetCoreNetworkPolicyDocumentSegmentActionVia

The network function groups and any edge overrides associated with the action.

whenSentTo GetCoreNetworkPolicyDocumentSegmentActionWhenSentTo

The destination segments for the send-via or send-to action.

action string

Action to take for the chosen segment. Valid values: create-route, share, send-via and send-to.

segment string

Name of the segment.

description string

A user-defined string describing the segment action.

destinationCidrBlocks string[]

List of strings containing CIDRs. You can define the IPv4 and IPv6 CIDR notation for each AWS Region. For example, 10.1.0.0/16 or 2001:db8::/56. This is an array of CIDR notation strings.

destinations string[]

A list of strings. Valid values include ["blackhole"] or a list of attachment ids.

mode string

String. When action is share, a mode value of attachment-route places the attachment and return routes in each of the share_with segments. When action is send-via, indicates the mode used for packets. Valid values: attachment-route, single-hop, dual-hop.

shareWithExcepts string[]

A set subtraction of segments to not share with.

shareWiths string[]

A list of strings to share with. Must be a substring is all segments. Valid values include: ["*"] or ["<segment-names>"].

via GetCoreNetworkPolicyDocumentSegmentActionVia

The network function groups and any edge overrides associated with the action.

whenSentTo GetCoreNetworkPolicyDocumentSegmentActionWhenSentTo

The destination segments for the send-via or send-to action.

action str

Action to take for the chosen segment. Valid values: create-route, share, send-via and send-to.

segment str

Name of the segment.

description str

A user-defined string describing the segment action.

destination_cidr_blocks Sequence[str]

List of strings containing CIDRs. You can define the IPv4 and IPv6 CIDR notation for each AWS Region. For example, 10.1.0.0/16 or 2001:db8::/56. This is an array of CIDR notation strings.

destinations Sequence[str]

A list of strings. Valid values include ["blackhole"] or a list of attachment ids.

mode str

String. When action is share, a mode value of attachment-route places the attachment and return routes in each of the share_with segments. When action is send-via, indicates the mode used for packets. Valid values: attachment-route, single-hop, dual-hop.

share_with_excepts Sequence[str]

A set subtraction of segments to not share with.

share_withs Sequence[str]

A list of strings to share with. Must be a substring is all segments. Valid values include: ["*"] or ["<segment-names>"].

via GetCoreNetworkPolicyDocumentSegmentActionVia

The network function groups and any edge overrides associated with the action.

when_sent_to GetCoreNetworkPolicyDocumentSegmentActionWhenSentTo

The destination segments for the send-via or send-to action.

action String

Action to take for the chosen segment. Valid values: create-route, share, send-via and send-to.

segment String

Name of the segment.

description String

A user-defined string describing the segment action.

destinationCidrBlocks List<String>

List of strings containing CIDRs. You can define the IPv4 and IPv6 CIDR notation for each AWS Region. For example, 10.1.0.0/16 or 2001:db8::/56. This is an array of CIDR notation strings.

destinations List<String>

A list of strings. Valid values include ["blackhole"] or a list of attachment ids.

mode String

String. When action is share, a mode value of attachment-route places the attachment and return routes in each of the share_with segments. When action is send-via, indicates the mode used for packets. Valid values: attachment-route, single-hop, dual-hop.

shareWithExcepts List<String>

A set subtraction of segments to not share with.

shareWiths List<String>

A list of strings to share with. Must be a substring is all segments. Valid values include: ["*"] or ["<segment-names>"].

via Property Map

The network function groups and any edge overrides associated with the action.

whenSentTo Property Map

The destination segments for the send-via or send-to action.

NetworkFunctionGroups List<string>

A list of strings. The network function group to use for the service insertion action.

WithEdgeOverrides List<GetCoreNetworkPolicyDocumentSegmentActionViaWithEdgeOverride>

Any edge overrides and the preferred edge to use.

NetworkFunctionGroups []string

A list of strings. The network function group to use for the service insertion action.

WithEdgeOverrides []GetCoreNetworkPolicyDocumentSegmentActionViaWithEdgeOverride

Any edge overrides and the preferred edge to use.

networkFunctionGroups List<String>

A list of strings. The network function group to use for the service insertion action.

withEdgeOverrides List<GetCoreNetworkPolicyDocumentSegmentActionViaWithEdgeOverride>

Any edge overrides and the preferred edge to use.

networkFunctionGroups string[]

A list of strings. The network function group to use for the service insertion action.

withEdgeOverrides GetCoreNetworkPolicyDocumentSegmentActionViaWithEdgeOverride[]

Any edge overrides and the preferred edge to use.

network_function_groups Sequence[str]

A list of strings. The network function group to use for the service insertion action.

with_edge_overrides Sequence[GetCoreNetworkPolicyDocumentSegmentActionViaWithEdgeOverride]

Any edge overrides and the preferred edge to use.

networkFunctionGroups List<String>

A list of strings. The network function group to use for the service insertion action.

withEdgeOverrides List<Property Map>

Any edge overrides and the preferred edge to use.

EdgeSets List<ImmutableArray<string>>

A list of a list of strings. The list of edges associated with the network function group.

UseEdge string

The preferred edge to use.

Deprecated: use_edge is deprecated. Use use_edge_location instead.

UseEdgeLocation string

The preferred edge to use.

EdgeSets [][]string

A list of a list of strings. The list of edges associated with the network function group.

UseEdge string

The preferred edge to use.

Deprecated: use_edge is deprecated. Use use_edge_location instead.

UseEdgeLocation string

The preferred edge to use.

edgeSets List<List<String>>

A list of a list of strings. The list of edges associated with the network function group.

useEdge String

The preferred edge to use.

Deprecated: use_edge is deprecated. Use use_edge_location instead.

useEdgeLocation String

The preferred edge to use.

edgeSets string[][]

A list of a list of strings. The list of edges associated with the network function group.

useEdge string

The preferred edge to use.

Deprecated: use_edge is deprecated. Use use_edge_location instead.

useEdgeLocation string

The preferred edge to use.

edge_sets Sequence[Sequence[str]]

A list of a list of strings. The list of edges associated with the network function group.

use_edge str

The preferred edge to use.

Deprecated: use_edge is deprecated. Use use_edge_location instead.

use_edge_location str

The preferred edge to use.

edgeSets List<List<String>>

A list of a list of strings. The list of edges associated with the network function group.

useEdge String

The preferred edge to use.

Deprecated: use_edge is deprecated. Use use_edge_location instead.

useEdgeLocation String

The preferred edge to use.

Segments List<string>

A list of strings. The list of segments that the send-via action uses.

Segments []string

A list of strings. The list of segments that the send-via action uses.

segments List<String>

A list of strings. The list of segments that the send-via action uses.

segments string[]

A list of strings. The list of segments that the send-via action uses.

segments Sequence[str]

A list of strings. The list of segments that the send-via action uses.

segments List<String>

A list of strings. The list of segments that the send-via action uses.